short-circuiting

英 [ˌʃɔːt ˈsɜːkɪtɪŋ]

美 [ˌʃɔːrt ˈsɜːrkɪtɪŋ]

v.  (使)短路; (做事)抄近路，走捷径
short-circuit的现在分词

柯林斯词典

• V-ERG (使)短路
  If an electrical deviceshort-circuitsor if someone or somethingshort-circuitsit, a wrong connection or damaged wire causes electricity to travel along the wrong route and damage the device.
  1. Carbon dust and oil build up in large motors and cause them to short-circuit...
     碳尘和燃油在大发动机里越积越多，造成了发动机短路。
  2. Once inside they short-circuited the electronic security.
     一旦置入，它们就会使电子安全设施短路。
  3. Short-circuitis also a noun.
     
  4. The fire was started by an electrical short-circuit.
     火灾是由电线短路引发的。
• VERB 回避，绕过（某一流程或程序)
  If someone or somethingshort-circuitsa process or system, they avoid long or difficult parts of it and use a quicker, more direct method to achieve their aim.
  1. The approach was intended to short-circuit normal complaints procedures.
     这种方法旨在避开正常的投诉程序。

双语例句

• Metal transfer frequency are usually taken as the criteria to evaluate the process stability of short-circuiting arc welding.
  短路过渡焊接时，熔滴过渡频率通常被作为评价焊接过程稳定性及焊接质量的重要指标。
• Randomicity& stability of short-circuiting droplet transfer in arc welding process
  弧焊短路过渡过程的随机性与稳定性
• The Employer reserves the right to perform additional inspection of production welds made using GMAW in the short-circuiting transfer mode.
  业主保留对使用短路过渡模式下的gmaw的生产焊缝进行附加检验的权利。
• The weld quality under different welding conditions is related to the welding parameters which are inherent electrical parameters in the welding process itself, i.e. welding current, welding voltage, arc sound, short-circuiting frequency and so on.
  不同工艺条件下的焊接质量的好坏，肯定会反映在与焊接过程本身固有的焊接工艺参数上，如焊接电流、焊接电压、电弧声压、熔滴过渡频率等等。
• A arc parameter-measuring system was developed to analyze the process of short-circuiting arc welding and the effect of arc energy on the welding stability.
  为了分析短路过渡电弧的焊接过程和探讨电弧能量对焊接稳定性的影响，设计了短路过渡电弧电参数检测系统。
• Short-circuiting Effect and the Solution in Gnutella Network
  Gnutella网络中的短路效应及其解决方案
• Multivariate statistical process control for on line monitoring of short-circuiting GMAW
  短路GMAW焊在线质量监测的多变量统计过程控制方法
• He found that, by charging a capacitor to various voltages and discharging it by short-circuiting it with the fuse, he could create a controlled amount of surge current.
  他发现通过电容充电到各种电压，用保险丝短路放电，可以形成一个可控的浪涌电流。
• Influence of dynamic electromagnetic force on stability of short-circuiting transfer in GMAW
  电磁力动态变化对短路过渡稳定性的影响
• The control of CO 2 arc welding short-circuiting transfer with magnetic field is studied.
  研究了外加磁场对CO2焊短路过渡的控制。