bents

英

美

网络  班茨

双语例句

• The Method for Calculating the Temperature Effect on Longitudinal Bents Considering the Elastic Resistance of Transverse Beams
  考虑横梁弹性抵抗的纵向排架温度内力分析法
• Bents may be braced in a number of ways. The full diagonal bracing is the most economical type of wind bracing.
  排架的支撑方法有多种。最经济的抗风支撑形式是完全对角支撑。
• Method of Analyzing Single-Story Mill Hinged Bents and Multistory Rigid Frames Taking Account of Both the Rotation of Footings and the Deformation of Columns
  单层厂房铰接排架和多层框架结构考虑基础转动及柱变形的内力分析法
• Since shafting bearing faults occurred to a generating unit after running for 20, 000 hours, the lower bents of the quaternary superheater burst in succession after start and stop for several times.
  某机组运行2×104h时因汽轮机轴承出现故障，多次启停后导致锅炉四级过热器下弯头处相继发生爆管。
• Analyzing the Elasto-Plastic of Single-Storey Factory Building Bents in Earthquake Response
  单层厂房排架弹塑性地震反应分析
• In this paper, the formula for computing the stability of single-story mill bents has been developed by applying the formula of computing column buckling under vertical force expressed in integral form.
  本文将积分形式的纵力弯曲公式用于排架稳定性计算，得出一个简便而精确的排架稳定性计算公式。
• If the floor is not sufficiently rigid to transform the loads, a horizontal bracing system must be provided between bents.
  如果楼面没有足够的刚度去传递这些荷载。那么还必须在排架之间增加水平支撑系统。
• An Accurate Method of Calculating Internal Force and Change of Position of Bents of All-vertical-piled Wharf under Horizontal Forces
  求解水平力作用下全直桩码头排架内力和变位的一种较精确方法
• Plane calculation method is usually adopted for high-piled wharf design, i. e., to calculate the interal force of structure in the transverse longitudinal plane directions, in which, transverse bents are calculated as flexible platform and longitudinal girders as elastic supporting continuous girders.
  在高桩码头设计中，通常采用平面计算方法，按纵向和横向2个平面进行结构内力计算，即横向排架按柔性桩台计算，纵梁按弹性支承连续梁计算。
• In order to meet requirements of structural design specification, foundation treatment was conducted by means of replacement of the filling materials in the foundation, rigid connection of the transversal beams with columes was adopted to make transversal bents become rigid frames.
  通过采用地基换填处理，以及楼体横梁与立柱采用刚性连接，使横向排架形成刚架结构等方法，使结构设计满足规范要求。